Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Ryan Lutz

Edit approved by Ryan Lutz

Deleted
Added
Unchanged

Step Lines

[* icon_note] Depending which iteration of the TAZ 5 you have, a "TAZ 5 0.5mm Nozzle" sticker may need to be removed for this step.
[* black] Remove the following pins from the extruder assembly-side wiring harness:
[* black] Pins 5 & 6: Heater cartridge
[* black] Pins 9 & 10: Blower fan
[* black] Pins 15 & 16: Thermistor
[* icon_note] To remove a pin, push in on the small metal tab on the side of the harness with a sharp object, then push down on the end of the pin with a flat object and pull the wire free.
[* black] Pin diagram from Lulzbot's documentation: http://download.lulzbot.com/TAZ/5.0_0.5noz/production_parts/Electronics/Extruder%20Connections/

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added