Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Ryan Lutz

Edit approved by Ryan Lutz

Deleted
Added
Unchanged

Step Lines

[* violet] Using a 2.5mm hex key, remove the two M3 screws securing the layer fan shroud to the extruder assembly.
[* black [* icon_reminder] Reinstall the screws into the inserts on the extruder assembly so as not to lose track of them for reassembly.
[* black [* icon_reminder] Reinstall the screws into the inserts on the extruder assembly so as not to lose track of them for reassembly.