Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Ryan Lutz

Edit approved by Ryan Lutz

Deleted
Added
Unchanged

Step Lines

[title] Remove the extruder assembly
[* green] Unplug the pin harness.
[* orange] Using a 2.5mm hex key, remove the one M3 screw securing the extruder assembly to the carriage plate.
[* blackicon_reminder] Reinstall the screw into the insert on the carriage plate to keep track of it for reassembly.
[* blackicon_reminder] Reinstall the screw into the insert on the carriage plate to keep track of it for reassembly.
[* black] Lift the extruder assembly up and off the carriage.