Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Ryan Lutz

Edit approved by Ryan Lutz

Deleted
Added
Unchanged

Step Lines

[title] Remove the extruder assembly
[* green] Unplug the pin harness.
[* blackorange] Using a 2.5mm hex key, remove the one M3 screw securing the extruder assembly to the carriage plate.
[* blackorange] Using a 2.5mm hex key, remove the one M3 screw securing the extruder assembly to the carriage plate.
[* black] Lift the extruder assembly up and off the carriage.

Image 2

No previous image

Added

Image 3

No previous image

Added