Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #33

Edit by Ryan Lutz

Edit approved by Ryan Lutz

Deleted
Added
Unchanged

Step Lines

[title] Readjust Z endstop
[* black] Thumb screwUnscrew the thumbscrew almost all the way up.
[* yellow] Home the Z axis.
[* black] Depending
on left sidehow far the nozzle is from the bed, screw the thumbscrew down a turn or two at a time.
[* black] Repeat homing and adjusting until the nozzle is the distance of a paper's thickness away from the bed
.
[* black] Thumb screwUnscrew the thumbscrew almost all the way up.
[* yellow] Home the Z axis.
[* black] Depending
on left sidehow far the nozzle is from the bed, screw the thumbscrew down a turn or two at a time.
[* black] Repeat homing and adjusting until the nozzle is the distance of a paper's thickness away from the bed
.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added