Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #32

Edit by Ryan Lutz

Edit approved by Ryan Lutz

Deleted
Added
Unchanged

Step Lines

[title] Torque downTighten nozzle
[title] Torque downTighten nozzle
[* black] [https://www.matterhackers.com/articles/mattercontrol-getting-started#connectingtoaprinter|Connect the printer to MatterControl] and set the extruder temperature to 260°C.
[* black] Using a 7mm socket wrench and an adjustable wrench or tongue-and-groove pliers to hold the heat block steady, tighten the nozzle.
[* icon_caution] Do not over-tighten; one firm adjustment in the right direction is sufficient.