Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Ryan Lutz

Edit approved by Ryan Lutz

Deleted
Added
Unchanged

Step Lines

[title] Upload new firmware
[* black] FortunatelyDownload the Hexagon and E3D use the same thermistor, however depending on how you wiredlatest firmware from Lulzbot: http://download.lulzbot.com/TAZ/5.0_0.5noz/software/2015Q2/firmware/juniperberry_firmware/
[* black] Open
the cooling fan you may need to change the fan configurationMarlin.ino file in the firmware[http://arduino.cc/en/Main/Software|Arduino IDE].
[* black] We should provideEdit the modified firmware files, but also describeConfiguration.h file and change this line to the exact changes we made.following:
[* red] ``#define TEMP_SENSOR_0 5``

[* black] Lulzbot has instructions onUpload the new firmware flashing [https://ohai-kit.alephobjects.com/project/firmware-flashing/|here].
[* black] Actually its probably best
to just instruct people to hardwire the fan to 24V and eliminateprinter.
[* black] For more detailed information about
this stepprocess, see [https://ohai-kit.alephobjects.com/project/firmware-flashing/|Lulzbot's guide to firmware flashing].
[* black] FortunatelyDownload the Hexagon and E3D use the same thermistor, however depending on how you wiredlatest firmware from Lulzbot: http://download.lulzbot.com/TAZ/5.0_0.5noz/software/2015Q2/firmware/juniperberry_firmware/
[* black] Open
the cooling fan you may need to change the fan configurationMarlin.ino file in the firmware[http://arduino.cc/en/Main/Software|Arduino IDE].
[* black] We should provideEdit the modified firmware files, but also describeConfiguration.h file and change this line to the exact changes we made.following:
[* red] ``#define TEMP_SENSOR_0 5``

[* black] Lulzbot has instructions onUpload the new firmware flashing [https://ohai-kit.alephobjects.com/project/firmware-flashing/|here].
[* black] Actually its probably best
to just instruct people to hardwire the fan to 24V and eliminateprinter.
[* black] For more detailed information about
this stepprocess, see [https://ohai-kit.alephobjects.com/project/firmware-flashing/|Lulzbot's guide to firmware flashing].

Image 1

No previous image

Added