Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #18

Edit by Ryan Lutz

Edit approved by Ryan Lutz

Deleted
Added
Unchanged

Step Lines

[title] Rewire coolinglayer fan in control box
[* black] Remove the four M3 screws securing the access plate to the control box.
[* icon_caution]
The stock heat sinkelectronics cooling fan is a 5V micro blower. To power the E3D fan these lines needattached to the plate; be rewiredcareful not to 24Vput any strain on the wires as you remove the access plate as they are connected to the main circuit board.
[title] Rewire coolinglayer fan in control box
[* black] Remove the four M3 screws securing the access plate to the control box.
[* icon_caution]
The stock heat sinkelectronics cooling fan is a 5V micro blower. To power the E3D fan these lines needattached to the plate; be rewiredcareful not to 24Vput any strain on the wires as you remove the access plate as they are connected to the main circuit board.