Site Navigation

Your Account

Choose Language

Changes to Step #16

Edit by Tyler Anderson

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[* black] AttachScrew the red lever overEZR Struder to the stepper motor using 4 screws.
[* black] Do not remove the zip tie on the EZR Struder until you have some screws in place. The two halves of the extruder are under tension and
the hobbed gear withzip tie is holding them together.
[* black] Make sure
the red lever rotated 90° clockwise fromis oriented opposite the motor’s plugwire connector.
[* black] AttachScrew the red lever overEZR Struder to the stepper motor using 4 screws.
[* black] Do not remove the zip tie on the EZR Struder until you have some screws in place. The two halves of the extruder are under tension and
the hobbed gear withzip tie is holding them together.
[* black] Make sure
the red lever rotated 90° clockwise fromis oriented opposite the motor’s plugwire connector.

Image 1

Old Version

New Version