Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by Tyler Anderson

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[* icon_note] The MightBoard RevG does not support the thermistor that comes in the E3D kit. Instead you will need to either reusepurchase the stock thermocouple or purchase another thermocouple separatelyE3D Type K Thermocouple Cartridge.
[* black] Insert stockthe thermocouple into E3D.
[* black] Secure with the E3D thermistor screw and washer using 2mm allen wrench.
[* icon_caution] This step is outdated. The stock
thermocouple will not fit in E3D's new heater blocks. Instead you must replace the stock thermocouple with the [https://www.matterhackers.com/store/printer-accessories/e3d-type-k-thermocouple-cartridge|E3D Type K Thermocouple Cartridge]place using a 3 mm grub screw.
[* icon_note] The MightBoard RevG does not support the thermistor that comes in the E3D kit. Instead you will need to either reusepurchase the stock thermocouple or purchase another thermocouple separatelyE3D Type K Thermocouple Cartridge.
[* black] Insert stockthe thermocouple into E3D.
[* black] Secure with the E3D thermistor screw and washer using 2mm allen wrench.
[* icon_caution] This step is outdated. The stock
thermocouple will not fit in E3D's new heater blocks. Instead you must replace the stock thermocouple with the [https://www.matterhackers.com/store/printer-accessories/e3d-type-k-thermocouple-cartridge|E3D Type K Thermocouple Cartridge]place using a 3 mm grub screw.

Image 1

Old Version

New Version