Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Tyler Anderson

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[title] Assembling the E3D v6 Hot End
[* black] See [https://wiki.e3d-online.com/wiki/E3D-v6_Assembly|E3D's wiki for detailed assembly instructions].
[*
black] Screw nozzle and heat break into heating block. When properly assembled there will be a slight gap between the head of the nozzle and the block.
[* black] Apply thermal compound to heat break threads

[* black] Screw the heating blockheat break into the heat sink.
[* black] See [https://wiki.e3d-online.com/wiki/E3D-v6_Assembly|E3D's wiki for detailed assembly instructions].
[*
black] Screw nozzle and heat break into heating block. When properly assembled there will be a slight gap between the head of the nozzle and the block.
[* black] Apply thermal compound to heat break threads

[* black] Screw the heating blockheat break into the heat sink.
[* black] Attach the cooling fan.
[* black] Attach the E3D Mount Lock to the top of the heat sink

Image 1

Old Version

New Version

Image 2

No previous image

Added

Image 3

No previous image

Added