Site Navigation

Your Account

Choose Language

Changes to How to Install an E3D v6 HotEnd on a Creality CR-10 Introduction

Edit by Tyler Anderson

Edit approved by Tyler Anderson

Deleted
Added
Unchanged
Time Required Min
1 hour
Time Required Max
1 hour
Imageid
Before
After

Tools

  • 1.5 mm Hex Driver x1 added.
  • 2 mm Hex Driver x1 added.
  • 2.5 mm Hex Driver x1 added.
  • AVR Programmer x1 added.
  • Soldering iron x1 added.

Parts

  • Creality CR-10 E3D Mount x1 added.
  • M2 Heat Set Insert x2 added.
  • M3 Heat Set Insert x2 added.
  • Assembled E3D v6 HotEnd 1.75mm Universal x1 added.
  • M2x12 Screw x3 added.
  • M3x6 Screw x3 added.
  • M3x14 Screw x2 added.

Steps

Step #: 1
Before
After
Step #: 2
Before
After
Step #: 3
Before
After
Step #: 4
Before
After
Step #: 5
Before
After
Step #: 6
Before
After
Step #: 7
Before
After
Step #: 8
Before
After
Step #: 9
Before
After
Step #: 10
Before
After
Step #: 11
Before
After
Step #: 12
Before
After