Site Navigation

Your Account

Choose Language

Tools

Parts

  1. Remove any screws securing the motor  and extract the motor from the printer.
    • Remove any screws securing the motor and extract the motor from the printer.

    • Remove any belt pulleys from the spindle.

    • Lay the motor down with the spindle facing up.

  2. Lay the damper down on top of the motor with the side with the two larger, non-threaded holes touching the top of the motor. Lay the damper down on top of the motor with the side with the two larger, non-threaded holes touching the top of the motor.
    • Lay the damper down on top of the motor with the side with the two larger, non-threaded holes touching the top of the motor.

  3. Using a 2.5mm hex key, install two 6mm M3 socket-head screws through the larger holes and into the two threaded holes diagonal from one another. Using a 2.5mm hex key, install two 6mm M3 socket-head screws through the larger holes and into the two threaded holes diagonal from one another.
    • Using a 2.5mm hex key, install two 6mm M3 socket-head screws through the larger holes and into the two threaded holes diagonal from one another.

  4. Reinstall the belt pulley, adjusting its position on the spindle to compensate for the new damper (5.75mm thick).
    • Reinstall the belt pulley, adjusting its position on the spindle to compensate for the new damper (5.75mm thick).

  5. The motor is ready for installation! Use two M3 screws to secure the damper to the printer. Make sure the screws aren't long enough to go through the threaded holes on the damper and into the holes on the motor as this will negate the effect.
    • The motor is ready for installation!

    • Use two M3 screws to secure the damper to the printer.

      • Make sure the screws aren't long enough to go through the threaded holes on the damper and into the holes on the motor as this will negate the effect.

Finish Line

Ryan Lutz

Member since: 06/30/2015

1,640 Reputation

15 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 2

Past 7 Days: 14

Past 30 Days: 54

All Time: 1,802