Site Navigation

Your Account

Join
Log In

Choose Language

How To Show and Use MatterControl Print Leveling

Written By: Ryan Lutz (and one other contributor)

Comments: 0
Favorites: 0

How To Show and Use MatterControl Print Leveling

Difficulty

Very easy

Steps

3

Time Required

00:01:00

Step 1 How To Show and Use MatterControl Print Leveling

From the MatterControl main screen, navigate to 'Settings & Controls' -> SETTINGS -> Printer -> Features.

From the MatterControl main screen, navigate to 'Settings & Controls' -> SETTINGS -> Printer -> Features.
Uncheck the box for 'Has Hardware Leveling'.

Step 2

Navigate to SETTINGS -> Printer -> Custom G-Code.

In the 'Start G-Code' section, delete the line containing the command G29.

Navigate to SETTINGS -> Printer -> Custom G-Code.
In the 'Start G-Code' section, delete the line containing the command G29.
The ; indicates a comment. You can delete the ; and any text after it on the same line as the G29 but all you really need to delete is the G29.

Step 3

Navigate to OPTIONS.

You should now see the Calibration section with Software Print Leveling accessible. You can enable it, or configure it for use then enable it.

Navigate to OPTIONS.
You should now see the Calibration section with Software Print Leveling accessible. You can enable it, or configure it for use then enable it.

Finish Line

Author

with 1 other contributor

Ryan Lutz

Member since: 06/30/2015

1,642 Reputation

15 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 1

All Time: 80