Site Navigation

Your Account

Choose Language

  1. From the MatterControl main screen, navigate to 'Settings & Controls' -> SETTINGS -> Printer -> Features.
  2. Navigate to SETTINGS -> Printer -> Custom G-Code. In the 'Start G-Code' section, delete the line containing the command G29.
  3. Navigate to OPTIONS. You should now see the Calibration section with Software Print Leveling accessible. You can enable it, or configure it for use then enable it.
    • Navigate to OPTIONS.

    • You should now see the Calibration section with Software Print Leveling accessible. You can enable it, or configure it for use then enable it.

Finish Line

Ryan Lutz

Member since: 06/30/2015

1,640 Reputation

15 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 73